LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Parking Aid System - F150) >> Diagnosis And Testing >> Parking Aid - Video >> Principles of Operation >> Camera Switching Module

Camera Switching Module

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The rear video camera always sends a video signal to the camera switching module. The front video camera only sends a video signal to the camera switching module when the vehicle is in a forward gear and the vehicle is in 4L or ELD modes. When the camera switching module receives only a rear video signal, the rear video signal is sent to the Front Display Interface Module (FDIM). When the camera switching module receives both front and rear signals, the front video signal is sent to the Front Display Interface Module (FDIM). An icon of a camera with the letter "F" is displayed while the front video signal is active.