LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 6.7L Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Hydraulic Lash Adjuster >> Removal

Hydraulic Lash Adjuster: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The hydraulic lash adjusters can be removed with the cylinder heads installed on the engine.
  1. Remove the rocker arm assemblies. For additional information, refer to Rocker Arm .
  2. Using a magnetic telescopic pick-up tool, remove the hydraulic lash adjuster from the valve tappet assembly.
scientia non olet · About LEMON Manuals