LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 6.7L Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Exhaust Manifold - LH >> Removal

Exhaust Manifold - LH: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper intake manifold. For additional information, refer to Intake Manifold - Upper .
  2. Remove the LH turbocharger inlet pipe. For additional information, refer to EXHAUST SYSTEM .
  3. Remove the turbocharger. For additional information, refer to FUEL CHARGING AND CONTROLS - TURBOCHARGER .
  4. Remove the 4 bolts and the LH exhaust manifold heat shield.
  5. Remove the 8 nuts, 8 spacers and the LH exhaust manifold.
    • Remove and discard the exhaust manifold gasket and nuts.
    • Replace any exhaust manifold stud(s) that is damaged or removed with the nut.
scientia non olet · About LEMON Manuals