LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Windows And Glass - Glass, Frames And Mechanisms - F150) >> Removal And Installation >> Window Control Switch - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable trim tool, release the 2 clips on the outer edge of the window control switch bezel and pull the window control switch assembly straight upward.
    Fig 1: Releasing Clips On Outer Edge Of Window Control Switch Bezel
    G06173730Courtesy of FORD MOTOR CO.
  2. Disconnect the window control switch electrical connectors.
  3. Release the tabs and remove the window control switch from the bezel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals