Pinpoint Test D: A Single Power Window is Inoperative - RH Front: Notes
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Refer to OEM WIRING DIAGRAMS Power Windows for schematic and connector information.
NOTE:
De-initialize, then initialize the front power window motor when any of the following occur:
- the LH or RH front power window motor is removed from the window regulator drum housing
- a new window regulator and/or motor is installed
- a new window glass is installed
- a new top run is installed
- a new top run is installed
- any operation in which grease or lubricants are applied to the window regulator or glass run