LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Instrument Cluster Illumination And Panel Illumination - F150) >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel side finish panel.
    2. NOTE: The instrument panel dimmer switch is removed by pushing from behind.
  2. Remove the instrument panel dimmer switch and bezel assembly from the instrument panel.
    • Disconnect the electrical connectors.
  3. Release the tabs and separate the instrument panel dimmer switch from the bezel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals