LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Transfer Case -- F150) >> Specifications

Section 187 (Transfer Case -- F150): Specifications

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
Motorcraft® MERCON® LV Automatic
Transmission Fluid
XT-10-QLVC
MERCON® LV 1.4L (2.9 pt)(1)
Motorcraft® Transfer Case Fluid
XL-12
ESP-M2C166-H 1.4L (2.9 pt)(2)
Thread Sealant with PTFE
TA-24
WSK-M2G350-A2 -
Ultra Silicone Sealant
TA-29
- -
(1) 2-speed torque-on-demand
(2) Electronic Shift-On-The-Fly (ESOF)
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Crossmember bolts 90 66 -
Drain plug 15 - 133
Exhaust heat shield bolts 15 - 133
Exhaust support bracket bolt 35 26 -
Fill plug 15 - 133
Mode Indication Switch (MIS) 41 30 -
Shift motor bolts 10 - 89
Shift motor nuts 3 - 27
Skid plate bolts 40 30 -
Transfer case bolts (1) - - -
Transfer case field coil nuts 10 - 89
Transfer case-to-transmission bolts(1) - - -
Transmission mount bolts 90 66 -
Transmission mount nuts 103 76 -
(1) Refer to the appropriate procedure in this information.