LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Transfer Case -- F150) >> In-Vehicle Repair >> Transfer Case Rear Output Shaft Seal >> Removal

Transfer Case Rear Output Shaft Seal: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, REFER to JACKING & LIFTING .
  2. Remove the rear driveshaft. For additional information, REFER to DRIVESHAFT .
  3. Using a suitable seal puller, remove the rear output shaft seal.
    Fig 1: Locating Rear Output Shaft Seal
    G06128036Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals