Transfer Case - 2-Speed Torque-On-Demand: Notes
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Handle 205-D055 (D81L-4000-A) or equivalent |
|
| Holding Fixture, Transmission 307-003 (T57L-500-B) |
|
| Installer, Front Axle Oil Seal 205-350 (T95T-3010-A) |
|
| Installer, Input Shaft Bearing 308-085 (T83T-7025-C) |
|
| Installer, Input Shaft Oil Seal 308-186 (T90T-7127-B) |
|
| Installer, Input Shaft Oil Seal 308-249 (T96T-7127-A) |
|
| Installer, Mainshaft Bearing 308-060 (T77J-7025-K) |
|
| Installer, Output Shaft Front Bearing 308-410 |
|
| Installer, Valve Stem Oil Seal 303-367 (T90P-6510-AH) |
|
| Remover, Bearing Cup 308-047 (T77F-1102-A) |
|
| Slide Hammer 100-001 (T50T-100-A) |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC |
MERCON® LV |
| Ultra Silicone Sealant TA-29 |
- |