LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Automatic Transmission Cooling System -- F150) >> Removal And Installation >> Transmission Fluid Cooler >> Transmission Cooling >> Removal

Transmission Cooling: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid cooler inlet hose from the transmission fluid cooler.
    • Discard the clamp.
    Fig 1: Locating Transmission Fluid Cooler Inlet Hose And Clamp
    G06171458Courtesy of FORD MOTOR CO.
  2. Remove the transmission fluid cooler outlet hose from the transmission fluid cooler.
    • Discard the clamp.
    Fig 2: Locating Transmission Fluid Cooler Outlet Hose And Clamp
    G06171459Courtesy of FORD MOTOR CO.
  3. Remove the transmission fluid cooler.