LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (Fuel Charging System & Fuel Control System - 6.2L (2V) - F150) >> Removal And Installation >> Throttle Body >> Removal

Throttle Body: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Air Cleaner (ACL) outlet tube. For additional information, REFER to INTAKE AIR DISTRIBUTION & FILTERING .
  2. Disconnect the heater coolant hose retainer from the ACL outlet pipe-to-Throttle Body (TB) adapter.
  3. Disconnect the crankcase ventilation tube quick connect fitting from ACL outlet pipe-to-TB adapter. For additional information, REFER to FUEL SYSTEM - GENERAL INFORMATION .
  4. Disconnect the brake booster vacuum hose from the ACL outlet pipe-to-TB adapter.
  5. Remove the 2 bolts and the ACL outlet pipe-to-TB adapter.
  6. Loosen the clamp and disconnect the TB adapter from the TB.
  7. Disconnect the Electronic Throttle Control (ETC) electrical connector.
  8. Remove the 4 bolts and the TB assembly.
scientia non olet · About LEMON Manuals