LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Information System And Entertainment System - F150) >> Removal And Installation >> In-Dash Computer >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel finish panel - center lower. For additional information, REFER to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the 4 screws and the in-dash computer.
    • Disconnect the electrical connectors.
    3. NOTE: Make sure the modem-antenna cable is routed to allow enough clearance for the in-dash computer. Failure to follow this instruction may result in damage to the modem-antenna cable.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals