LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Information System And Entertainment System - F150) >> Removal And Installation >> Audio Digital Signal Processing (DSP) Module - Front Captain's Chair >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.
  1. Upload the audio DSP module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
  2. Remove the floor console. For additional information, REFER to INSTRUMENT PANEL AND CONSOLE .
  3. Disconnect the audio DSP module electrical connectors.
  4. Remove the 3 bolts and the audio DSP module.
  5. To install, reverse the removal procedure.
    • Download the configuration information to the audio DSP module. For additional information, refer to PMI in MODULE CONFIGURATION .
scientia non olet · About LEMON Manuals