LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Information System And Entertainment System - F150) >> Removal And Installation >> Antenna Cable - AM/FM >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Audio Front Control Module (ACM). For additional information, refer to AUDIO CONTROL MODULE (ACM)  .
  2. Lower the glove compartment completely.
  3. Disconnect the AM/FM antenna cable from the AM/FM antenna.
  4. Separate the pushpins and remove the AM/FM antenna cable.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals