LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Interior Lighting System - F150) >> Removal And Installation >> Ambient Lighting Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console upper finish panel.
    • Lift the floor console finish panel upward to release the retaining clips
  2. Disconnect the electrical connector.
  3. Release the tabs and remove the ambient lighting switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals