LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Mechanical - 6.2L (2V) - F250-F350 Super Duty) >> In-Vehicle Repair >> Oil Pump Screen and Pickup Tube >> Removal

Oil Pump Screen and Pickup Tube: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan .
  2. Remove the oil pump screen and pickup tube support bracket nut.
    Fig 1: Locating Oil Pump Screen And Pickup Tube Support Bracket Nut
    G06518262Courtesy of FORD MOTOR CO.
  3. Remove the 2 bolts and the oil pump screen and pickup tube.
Fig 2: Locating Oil Pump Screen And Pickup Tube Bolts
G06518263Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals