Inspection and Verification
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern by operating the transmission external control.
- Visually inspect for obvious signs of mechanical and electrical damage; refer to the following chart:VISUAL INSPECTION CHART
Mechanical Electrical - Damaged Brake Shift Interlock Actuator (BSIA)
- Damaged Tow/Haul switch
- Damaged SelectShift™ switch
- Failed fuse(s):
- Body control Module(BCM)18(10A)
- BCM 42 (5A)
- PCM
- Loose or damaged connections
- Damaged wiring harness
- Corroded or damaged terminals
- If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART - EXTERNAL CONTROLS, COLUMN SHIFT or GO to SYMPTOM CHART - NVH COLUMN SHIFT .