LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (HVAC - Climate Control System - F150) >> Removal And Installation >> Blower Motor Speed Control >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the blower motor speed control electrical connector.
  2. Remove the 2 blower motor speed control screws.
  3. Remove the blower motor speed control.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals