Removal and Installation
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel upper storage compartment mat.
- Remove the 2 instrument panel upper storage compartment screws.
- Remove the instrument panel upper storage compartment in the following sequence.
- Lift upward on the front edge of the instrument panel upper storage compartment.
- Pull the instrument panel upper storage compartment toward the front of the vehicle.
- If equipped, disconnect the electrical connector.
- To install, reverse the removal procedure.
NOTE:
Instrument panel upper storage compartment with speaker shown in illustration, instrument panel upper storage compartment without speaker similar.