LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Instrument Panel And Console - F150) >> Removal And Installation >> Instrument Panel Finish Panel - RH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the passenger air bag module. For additional information, REFER to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 2 RH instrument panel finish panel screws.
  3. Remove the RH instrument panel finish panel.
    • Pull the RH instrument panel finish panel toward the rear of the vehicle to release the retaining clips.
  4. To install, reverse the removal procedure.
    • Make sure to align the finish panel retaining clips to the adjacent retaining clip holes.
scientia non olet · About LEMON Manuals