LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Instrument Panel And Console - F150) >> Removal And Installation >> Instrument Panel Finish Panel - LH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering wheel downward.
  2. Remove the 2 instrument cluster finish panel screws.
  3. Remove the instrument cluster finish panel.
    • Pull the instrument cluster finish panel toward the rear of the vehicle to release the retaining clips.
  4. Remove the LH instrument panel finish panel.
    • Pull the LH instrument panel finish panel toward the rear of the vehicle to release the retaining clips.
    • Disconnect the electrical connectors.
  5. To install, reverse the removal procedure.
    • Make sure to align the finish panel retaining clips to the adjacent retaining clip holes.
scientia non olet · About LEMON Manuals