LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Instrument Panel And Console - F150) >> Removal And Installation >> Instrument Panel Finish Panel - Center, Upper >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center instrument panel lower finish panel. For additional information, refer to Instrument Panel Finish Panel - Center, Lower  .
  2. Remove the 4 center instrument panel upper finish panel screws.
    Fig 1: Locating Center Instrument Panel Upper Finish Panel Screws
    G06173777Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals