LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Charging System (Battery, Mounting And Cables) - F150) >> Specifications

Section 165 (Charging System (Battery, Mounting And Cables) - F150): Specifications

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS

Item Specification
Battery 
Cold Cranking Amps (CCA) measured at -18°C (0°F) 750 CCA
Voltage 12 volts
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Battery cable body ground terminal bolt 13 - 115
Battery cable chassis ground terminal bolt 20 - 177
Battery cable engine ground terminal nut 25 18 -
Battery cable engine ground terminal stud bolt 47 35 -
Battery cable harness bracket bolt 20 - 177
Battery cable shield nut 12 - 106
Battery cable shield stud bolt 12 - 106
Battery cable terminal nut 5 - 44
Battery hold-down clamp bolt 7 - 62
Battery Junction Box (BJB) harness positive terminal nut 9 - 80
Battery tray bolt 17 - 150
Front axle mounting bolts 115 85 -
Generator B+ cable end nut 17 - 150
Generator B+ cable terminal/Power Distribution Box (PDB) cable terminal nut 9 - 80
Oil filter drip shield bolts 7 - 62
Power Steering Control Module (PSCM) harness positive terminal nut 9 - 80
PSCM skid plate bolts 40 30 -
Skid plate bolts 48 35 -
Starter solenoid positive cable terminal nut 12 - 106
Starter solenoid wire terminal nut 5 - 44
Transmission fluid cooler tube bracket nut 12 - 106