Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT) Sensor - 3.5L GTDI: Removal
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT)sensor and the Manifold Absolute Pressure (MAP)/Intake Air Temperature 2 (IAT2) sensor are not interchangeable.
- Remove the ACL outlet tube. For additional information, REFER to INTAKE AIR DISTRIBUTION & FILTERING .
- Disconnect the Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT) sensor electrical connector.
- Remove the 2 screws and the TCBP/CACT sensor.