LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Engine Controls - Electronic Engine Controls - F150) >> Removal And Installation >> Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT) Sensor - 3.5L GTDI >> Installation

Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT) Sensor - 3.5L GTDI: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the TCBP/CACT sensor and the 2 screws.
    • Tighten to 3 Nm (27 lb-in).
  2. Connect the TCBP/CACT sensor electrical connector.
  3. Install the ACL outlet tube. For additional information, REFER to INTAKE AIR DISTRIBUTION & FILTERING .
scientia non olet · About LEMON Manuals