LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Engine Controls - Electronic Engine Controls - F150) >> Removal And Installation >> Crankshaft Position (CKP) Sensor - 5.0L (4V) >> Removal

Crankshaft Position (CKP) Sensor - 5.0L (4V): Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold. For additional Information, REFER to ENGINE - 5.0L (4V) .
  2. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.
  3. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
  4. NOTE: The Crankshaft Position (CKP) sensor bolt is part of the CKP sensor and cannot be removed.

Loosen the bolt and remove the CKP sensor.

scientia non olet · About LEMON Manuals