LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Anti-Theft System - Passive Anti-Theft System - F150) >> Diagnosis And Testing >> Anti-Theft >> Principles of Operation >> Spare Key Programming

Spare Key Programming

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The customer spare key programming allows spare keys to be programmed (up to a maximum of 8) to the BCM without having to use a scan tool. Two programmed keys are required to carry out the procedure. This procedure can be disabled so that spare keys can only be programmed to the vehicle using a scan tool. Refer to Key Programming - Program a Key Using Two Programmed Keys  for the customer spare key programming procedure or Key Programming - Enable/Disable Spare Key Programming  for the enable/disable procedure.

scientia non olet · About LEMON Manuals