IKT With Remote Start
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The vehicle comes equipped from the factory with two programmed IKTs. The IKT incorporates both the PATS functions and the Remote Keyless Entry (RKE) transmitter functions in a single device. During key programming procedures, the PATS and RKE transmitter of an IKT are both programmed into the BCM. In addition to the IKTs, conventional PATS keys can also be programmed to the vehicle if requested by the customer. The BCM accepts the programming of up to 8 keys. Of those 8 keys a maximum of 4 IKTs can be programmed. If more than 4 IKTs are programmed, INT KEY COULD NOT PROGRAM is displayed in the message center during the key programming procedure and the RKE function of that IKT is non-functional.