LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Steering Column - F150) >> Removal And Installation >> Steering Column Shroud - Floor Shift >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws and the steering column opening trim panel.
  2. Separate the instrument cluster trim from the upper steering column shroud.
  3. Pull upward on the rearward portion of the upper steering column shroud to separate the clips from the lower steering column shroud.
    • Roll the upper steering column shroud upward on the hinge point and then pull straight rearward to remove the upper shroud.
  4. Remove the 3 screws and the lower steering column shroud.
    • To install, tighten to 2 Nm (18 lb-in).
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals