LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Steering Column - F150) >> Diagnosis And Testing >> Steering Column >> DTC Chart

DTC Chart

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
STEERING COLUMN CONTROL MODULE (SCCM) DTC CHART

DTC Description Action
B1298:09 Steering Column Adjust Up Switch: Component Failure INSTALL a new steering column control switch. REFER to Brake Pedal Control Switch in HYDRAULIC BRAKE ACTUATION . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test. If DTC B1298:09 returns, INSTALL a new Steering Column Control Module (SCCM). REFER to STEERING COLUMN SWITCHES . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test.
B1299:09 Steering Column Adjust Down Switch: Component Failure INSTALL a new steering column control switch. REFER to Brake Pedal Control Switch in HYDRAULIC BRAKE ACTUATION . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test. If DTC B1299:09 returns, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test.
B12A1:09 Steering Column Adjust Out Switch: Component Failure INSTALL a new steering column control switch. REFER to Brake Pedal Control Switch in HYDRAULIC BRAKE ACTUATION . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test. If DTC B12A1:09 returns, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test.
B12A2:09 Steering Column Adjust In Switch: Component Failure INSTALL a new steering column control switch. REFER to Brake Pedal Control Switch in HYDRAULIC BRAKE ACTUATION . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test. If DTC B12A2:09 returns, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . CLEAR the DTCs. VERIFY correct system operation. REPEAT the self-test.
B1375:18 Steering Column Tilt Motor: Circuit Current Below Threshold GO to PINPOINT TEST A .
B1375:19 Steering Column Tilt Motor: Circuit Current Above Threshold GO to PINPOINT TEST A .
B1375:71 Steering Column Tilt Motor: Actuator Stuck GO to PINPOINT TEST A .
B137E:18 Steering Column Telescope Motor: Current Below Threshold GO to PINPOINT TEST A .
B137E:19 Steering Column Telescope Motor: Current Above Threshold GO to PINPOINT TEST A .
B137E:71 Steering Column Telescope Motor: Actuator Stuck GO to PINPOINT TEST A .
B1C33:11 Steering Column Tilt Feedback Signal: Circuit Short To Ground GO to PINPOINT TEST C .
B1C33:12 Steering Column Tilt Feedback Signal: Circuit Short To Battery GO to PINPOINT TEST C .
B1C35:11 Steering Column Telescope Feedback Signal: Circuit Short To Ground GO to PINPOINT TEST C .
B1C35:12 Steering Column Telescope Feedback Signal: Circuit Short To Battery GO to PINPOINT TEST C .
- All Other SCCM DTCs REFER to STEERING COLUMN SWITCHES .