Ignition Lock Cylinder - Non Functional: Installation
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean all drill shavings from the steering column and inspect it for damage.
- Install a new ignition lock cylinder.
- Verify the ignition lock cylinder operation.
- If needed, program the new PATS keys. For additional information, refer to Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .