LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Handles, Locks, Latches And Entry Systems - F150) >> Removal And Installation >> Hood Latch Release Handle - Secondary >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the secondary hood latch release cable from the hood latch.
  2. Disconnect the secondary hood latch release cable from the guide clips.
  3. Remove the secondary hood latch release handle bolt.
    • To install, tighten to 8 Nm (71 lb-in).
  4. Remove the secondary hood latch release.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals