LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Handles, Locks, Latches And Entry Systems - F150) >> Diagnosis And Testing >> Handles, Locks, Latches and Entry Systems >> Pinpoint Tests >> Pinpoint Test U: Unable To Remove The Key From The Ignition Lock Cylinder >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The ignition switch contains a key removal inhibit solenoid. The solenoid prevents the ignition lock cylinder to be turned to lock and the key removed any time the transmission selector lever is in any position except park. The inhibit solenoid receives voltage at all times from the Body Control Module (BCM) fuse 28 (15A). When the transmission selector lever is in any gear except park, the selector switch closes, which supplies ground to the solenoid.

This pinpoint test is intended to diagnose the following: