Unlocking the Doors with the Keyless Entry Keypad System
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
To unlock the driver door (with stepped unlock enabled), enter either the factory set code or the personal code (each digit must be pressed within 5 seconds of the prior digit). This also illuminates the interior lamps.
To unlock all doors with stepped unlock enabled, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 button within 5 seconds.
To unlock all doors with stepped unlock disabled, enter either the factory set code or the personal code. This also illuminates the interior lamps. Refer to Stepped Unlock Programming for information on how to program the stepped unlocking.