Exterior Mirror Motor Synchronization - Power Folding

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The power folding mirrors may need to be synchronized anytime the mirrors are folded or unfolded without using the exterior mirror control switch, or if a new power folding mirror is installed.

NOTE: If the power folding mirrors are electronically folded or unfolded continuously (6 to 10 cycles), the power lockout feature will disable the system for 3-10 minutes to prevent damage to the power fold motors. After 3-10 minutes have elapsed, normal operation will resume.

Position the exterior mirror control switch to the CENTER position.
Press the exterior mirror control switch rearward to the FOLD/UNFOLD position and cycle the power folding mirrors in and out until a loud popping noise is heard.