Perform Repair

There are over 400 individual components in an automatic transmission. All of these parts must be in good working order. Many repairs are fairly straight forward. In these repairs you will:

• Clean and inspect all parts removed
• Attempt to determine root cause of the failure
• Identify and repair/replace any related damaged parts
• Carefully document findings on the repair order

In the case of clutch failure where the transmission fluid is heavily contaminated with friction material, the transmission will need to be overhauled. The repair will require complete disassembly and cleaning of the transmission. All seals and gaskets (except the reusable pan gasket) should be replaced.