Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The seat backrest cover on a backrest equipped with storage tray is not serviceable separately. A new backrest must be installed. For additional information, refer to SEAT BACKREST - FRONT, CENTER .

NOTE: For parts identification and location, refer to SEAT - EXPLODED VIEW, FRONT, CENTER .

Remove the seat backrest. For additional information, refer to SEAT BACKREST - FRONT, CENTER .
Un-tuck the zipper and open the backrest cover.
Invert the backrest cover and remove the hog rings.
Remove the backrest cover.
To install, reverse the removal procedure.