LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Seat System - F150) >> Removal And Installation >> Seat - Rear, Crew Cab, 60 Percent >> Removal

Seat - Rear, Crew Cab, 60 Percent: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 40 percent seat. For additional information, refer to SEAT - REAR, CREW CAB, 40 PERCENT  .
  2. Raise the seat cushion and remove the 2 front seat bolts.
  3. NOTE: The seat backrest latch is only accessible when the seat cushion is raised.
  4. Release the backrest latch.
    • From behind the backrest, pull up on the latch release and pull the backrest forward.
    • Release the cushion latch and lower the cushion and backrest.
      Fig 1: Releasing Backrest Latch
      G06458814Courtesy of FORD MOTOR CO.
  5. If equipped with heated seats, disconnect the electrical connector.
  6. Remove the safety belt retractor anchor nut.
    • Pull the safety belt retractor anchor and buckle through the seat cushion.
  7. Remove the rear seat nut and seat.