Seat - Rear, Crew Cab, 40 Percent: Removal
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the seat cushion and remove the 2 front seat bolts.
- Remove the 2 seat connecting bolts.
- Remove the safety belt buckle bolt cover.
- Release the backrest latch.
- From behind the backrest, pull up on the latch release and pull the backrest forward.
- Release the cushion latch and lower the cushion and backrest.
- If equipped with heated seats, disconnect the electrical connector.
- Remove the 2 rear seat nuts and seat.
NOTE:
The seat backrest latch is only accessible when the seat cushion is raised.