LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Seat System - F150) >> Removal And Installation >> Heated Seat Switch - Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable trim tool, release the 2 retainers and window control switch bezel.
  2. Disconnect the heated seat switch and window control switch electrical connectors.
  3. Release the locking tabs and remove the heated seat switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals