Heated Seat Module - Rear: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For parts identification and location, refer to SEAT - EXPLODED VIEW, REAR, CREW CAB .

NOTE: The seat backrest latch is only accessible when the seat cushion is raised.

Release and lower the 60 percent seat backrest.
- From behind the backrest, pull up on the latch release and pull the backrest forward.
- Release the cushion latch and lower the cushion and backrest.
  
  Fig 1: Releasing 60 Percent Seat Backrest
  Courtesy of FORD MOTOR CO.
Disconnect the 2 electrical connectors.
Remove the screw and un-hook the heated seat module.