Disassembly and Assembly
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For parts identification and location, refer to SEAT - EXPLODED VIEW, REAR, SUPERCAB
.
- Remove the rear seat cushion cover(s). For additional information, refer to SEAT CUSHION COVER - REAR, SUPERCAB .
- Remove the seat cushion latch. For additional information, refer to SEAT LATCH - REAR, SUPERCAB .
- Remove the riser rear screw and inboard riser from the rear seat frame.
- To install, tighten to 6 Nm (53 lb-in).
- Remove the 2 screws and 2 backrest latches from the rear seat frame.
- To assemble, reverse the disassembly procedure.