Disassembly and Assembly

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For parts identification and location, refer to SEAT - EXPLODED VIEW, REAR, SUPERCAB .

Remove the seat backrest cover. For additional information, refer to SEAT BACKREST COVER - REAR, SUPERCAB .
Push the release tabs and remove the 3 backrest plastic lock clips (one shown in illustration).

Fig 1: Locating Release Tabs And Backrest Plastic Lock Clips
Courtesy of FORD MOTOR CO.
To assemble, reverse the disassembly procedure.