LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Seat System - F150) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test AL: DTCs B1317, B1318 and B2486 >> Normal Operation - Driver Seat Module (DSM)

Normal Operation - Driver Seat Module (DSM)

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Driver Seat Module (DSM) continuously monitors the input voltage for correct operation. If the DSM detects input voltage below 10 volts, it stores DTC B1318 in memory. If the DSM detects input voltage above 15 volts, it stores DTC B1317 in memory. If DTC B1317 or B1318 is set, the DSM disables the memory system outputs for the driver seat and memory mirror operation.

scientia non olet · About LEMON Manuals