LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Seat System - F150) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test A: The Power Seat is Inoperative - Driver, With Manual Recliner >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The driver seat control switch is supplied voltage and ground. When the driver seat control switch is activated, voltage and ground is supplied to the applicable seat track motor to move the seat to the desired position. There are 3 seat track motors that combine to move the seat cushion horizontally (forward/rearward) and vertically (front up/down and rear up/down). If a new motor on the seat track needs to be installed, it is necessary to install an entire seat track assembly.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals