Rear Seats - Crew Cab: Notes
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The Crew Cab rear seat is a 40/60 split bench style with folding cushions and optional folding armrest with cup holder. The backrests are fixed to the rear cab panel by latches that can be accessed from behind only for service allowing the backrest to fold down. The backrest latches are accessible only when the seat cushion is folded upright.
The Crew Cab rear seat can be equipped with the following serviceable items:
- Accessory hooks attached to the bottom of each cushion
- Adjustable head restraints and head restraint covers
- Armrest, backrest and cushion covers
- Armrest, backrest and cushion foam pads
- Armrest, backrest, cushion and seat frames
- Backrest latch attached to each backrest frame
- Backrest latch strikers attached to the rear cab panel
- Cup holder attached to the armrest frame
- Cushion latches attached to the cushion frame and outboard risers
- Cushion release handle and bezel attached to the bottom of each cushion frame (includes release cable)
- Head restraint guide sleeves attached to the backrest frames
- Heated seat system
- Inboard and outboard seat risers
- Inboard and outboard side shields attached to the seat risers
- Non-serviceable lower anchors and tethers for children welded to the seat cushion frames
- Safety belt buckle attached to each inboard seat riser