Remote Start Climate Operation (If Equipped With Heated Or Climate Controlled Seats)

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The customer can select different climate control modes/preferences when the vehicle is started using the remote start feature. This can be accessed through the message center. For information on how to set the remote start preferences, refer to the Owner's Literature. When the driver seat and/or passenger seat is set to AUTO mode, the driver/passenger heated/climate controlled seat activates in full heat mode when the outside temperature is less than 0°C (32°F) and full cool mode (climate controlled seats only) when outside temperature is greater than 27°C (80°F) any time the vehicle is started using the remote start feature. No heated/climate controlled seat adjustments are recognized during remote start operation. When the ignition is cycled to the ON position after a remote start event, the heated/climate controlled seat switches off.