Front Center Seat
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Front center seat can be equipped with the following serviceable items:
- Backrest cover (without backrest storage)
- Backrest latch and latch cover attached to the RH side of the backrest and seat frame
- Cushion cover
- Cushion latch release handle
- Front and rear cup holders
- Front and rear storage trays attached to the seat frame
- LH and RH side shields attached to the seat frame
- Power Point and wiring attached to the rear cup holder and seat frame
- Safety belt buckle attached to the seat frame
- Seat frame
- Storage tray (in seat frame under cushion) (if equipped)
The front center seat is mounted to a pedestal under the carpet. Pedestal removal is not required for seat removal. The pedestal is also used for floor console mounting when not equipped with a front center seat. The pedestal is equipped with press fit spacers and washers above and below to prevent corrosion of body and seat structures. If removed, any of these items that become separated from the pedestal during service must be reinstalled to prevent corrosion damage that may compromise structural integrity of the body and seats.