Climate Controlled Seats
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The climate control seat system is able to heat and cool the driver and front passenger seats. Each climate controlled seat is operated by push-buttons on the FCIM located on the instrument panel. Each front seat temperature is then monitored and controlled by the Dual Climate Controlled Seat Module (DCSM) located on the passenger front seat track.
The climate controlled seat system contains the following serviceable components:
- Air filter (attached to each Thermo-Electric Device (TED) and blower assembly) (See the Owner's Literature for additional service and scheduled maintenance interval information)
- Cushion and backrest foam pads
- Cushion and backrest manifolds
- DCSM attached to the passenger seat track
- FCIM in the instrument panel (contains climate controlled seat switches)
- HVAC module located in the instrument panel (electrical interface between FCIM and DCSM)
- TED and blower assembly within each front seat cushion and backrest
- Ventilated cushion and backrest trim covers