LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1521 (Supplemental Restraint System - General Procedures, Removal And Installation) >> Removal And Installation >> Clockspring >> Removal

Removal And Installation: Clockspring: Removal

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: The following procedure prescribes critical repair steps required for correct restraint system operation during a crash. Follow all notes and steps carefully. Failure to follow step instructions may result in incorrect operation of the restraint system and increases the risk of serious personal injury or death in a crash.
NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    Remove the following items:

  1. 2.

    Disconnect the electrical connectors.
GFD43526Courtesy of FORD MOTOR COMPANY

  1. 3.

    Remove the screws and the clockspring.
GFD43527Courtesy of FORD MOTOR COMPANY